| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Services |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Nd:YAG Laser Rod |
|
Cryslaser manunfactures Nd:YAG for use in industrial,medical,military and scientific applications. The ND:YAG continues as the best of the rare earth garnet materials that are characterized by four-level laser operation which permits low threshold pulse and cw operation.
Advantages of Nd:YAG Include:
High gain
Low threshold
High efficiency
Low loss at 1.06μm
Good thermal conductivity and thermal shock characteristics
Mechanical strength
High optical quality
Material characteristics that allow for various modes of operation
(CW,pulsed,Q-switched,mode locked,and cavity dumped)
Cryslaser produces a wide variety of finished laser product,as well as supplying Nd:YAG material.Our general Nd:YAG production capabilities include:
Slab-Custom Geometries
Rod sizes form 2mm to 15mm in diameter and from 1mm to 220 mm in length
Nd dopant concentrations beween 0.1 and 1.3%
Polished and AR coated barrels
MIL-C-675C adhesion,abrasion and humidity resistance
Damage threshold of over 15 J/cm2
A wide variety of anti-reflection,partial reflector,high reflector and dichroic coatings
Premium grade Nd:YAG,with lower wavefront distortion,is available upon request
Typical finished part specifications and tolerances are listed below.
Specifications:
Material: Nd:YAG
Dopant concentration: As specified±0.1%
Diameter Tolerance: +0,-0.025mm
Length Tolerance: +/-0.5mm
Parallelism: <10 arc seconds
Perpendicularity: <5 arc minutes
Chamfer: 0.13±0.08mm at 45°
Barrel Finish: 50-80 micro-inch(RMS)
Wavefront Distortion: <λ/10 per inch @632.8nm
Extinction Ratio: >30Db
Surface Flatness: <λ/10 @632.8nm
Surface Quality: 10/5
Clear Aperture: >95%
Anti-Reflection Coating: R<0.15%@1064nm per surface
High-Reflection Coating: Standard HR coating with R>99.8%@1064nm and R<5% @808nm
|
){kind=link}